A 11,170 kg rated load on a 6 by 6 off-road chassis defines this unit, with a 27 MPa and 40 L per minute hydraulic circuit, fed by an imported Italian axial plunger pump, driving both the articulated loading arm and the tipping box. The arm grabs, lifts and loads pipe, spares, aggregate or drill cuttings, then the same truck hauls and self-dumps the material, so one vehicle replaces the loader-plus-truck pairing that a scattered well pad usually needs. A 100 second load and 110 second unload cycle keeps the loop moving rather than queuing. Sized at 11,026 by 2,495 by 3,260 mm with a 24,980 kg gross weight, it is built to reach remote and marginal wells where separate lifting equipment cannot be mobilized quickly.
The 11,170 kg rated payload on the 6 by 6 chassis means the articulated arm and the tipping box share one vehicle, removing the separate crane and front-end loader a scattered pad would otherwise dispatch.
The 27 MPa circuit flowing at 40 L per minute, built around an imported Italian axial plunger pump, gives the arm smooth luffing, slewing and grabbing under variable well-site loads.
A 100 second load and 110 second unload cycle keeps grab-and-dump moving, so the truck spends time hauling pipe, aggregate and cuttings rather than waiting on a separate loader.
The 6 by 6 drive and reinforced suspension carry the 13,680 kg curb weight over gravel, ruts and uneven pad ground, reaching dispersed marginal wells directly without staged transfers.
Load limiting, hydraulic anti-burst valves, tipping-angle limits, emergency stop and outrigger interlocks lock out unsafe lifting or dumping motions while the arm is working at a hazardous pad.
Changing the end-gripper attachment lets the same arm handle drill pipe, well-site spares, gravel and drill cuttings, matching the mixed material flow of drilling and workover locations.
| Product | Dump Truck with Hydraulic Arm |
|---|---|
| Product line | Oilfield Transport Equipment |
| Overall size (mm) | 11026 × 2495 ×3260 |
|---|---|
| Overall Weight (kg) | 24980 |
| Rated load (kg) | 11170 |
| Curb weight (kg) | 13680 |
| Driving form | 6×6 |
| Handing time (load / unload) | 100s/110s |
| Hydraulic system pressure | 27 MPa |
| Hydraulic system flow | 40 L/min |
| Oil pump | Import axial plunger pump, Italy |
For a useful technical response, include the target well conditions, operating depth or pressure, expected quantity, destination and any required configuration.
Send an InquiryAvailable configurations can be matched to the equipment model, operating conditions and project requirements.
Buyers evaluating the dump truck with hydraulic arm usually ask about rated load, arm reach and off-road reach.
The truck carries its own loading crane and a dumping bed, so one vehicle handles drill pipe, spares, gravel and cuttings from the supply point to the pad without a separate crane or loader on site. That matters on remote and scattered well sites where auxiliary equipment cannot follow — the truck arrives, loads, hauls and dumps in one trip.
It handles drilling pipes, well-site mechanical spare parts, gravel aggregates, drilling cuttings and bulk well-site supplies. By changing end-gripper attachments, it adapts to diversified loading-and-unloading demands of oil-field construction.
Yes. The chassis is a heavy off-road type with reinforced suspension and all-terrain tires sized for gravel, ruts and seasonal mud. It reaches remote marginal well locations that a standard on-road truck cannot, which is where the crane-and-trailer alternative starts to lose time.
The lifting and dumping circuits carry load-limit protection, a hydraulic burst valve on the boom cylinder, a tipping-angle limit and an emergency stop. The outriggers interlock with the boom — the crane will not lift if the outriggers are not set — which is the protection that matters most on soft well-pad ground.
Yes. The configuration is settled against the material-handling programme before the order: hydraulic-arm lifting grade and working radius, cargo-box capacity against the 11,170 kg rated load, explosion-proof grade, remote-control function and end-gripper attachments are matched to the expected loads, site terrain and local safety specifications, then written into the quotation and the factory test report.
Commercial terms are confirmed in the quotation for the exact configuration, quantity and destination.
Built at the Jingzhou plant under ISO 9001:2015 quality management, the hydraulic arm and hoist cylinder are pressure-tested to 1.5 times the rated load before shipment; the dump body, hinge structure and control valves are checked through a full factory test cycle.
Operation and maintenance manuals, chassis documentation and factory test reports are supplied; the hydraulic and electrical schematics are included for the client's service department.
Confirmed in the quotation according to configuration, quantity and destination.
Manuals, conventional spare parts and remote technical guidance are included; on-site commissioning and operator training can be arranged on request.
Payment schedule, Incoterms, port and packaging are agreed in the sales contract.
A recommended spare-parts list for the first operating period is provided with the quotation.
Explore nearby products to compare equipment scope before sending an inquiry.
A sealed 14.1 to 20 cubic metre powder tank on a heavy off-road chassis is the working heart of this unit, with a 7.5 to 10 cubic metre per minute compressor holding the chamber at a 0.2 MPa working pressure throughout…
This carrier is built around a 13 MPa lifting-and-landing hydraulic loop, backed by a 6 MPa fine-adjustment circuit and a 0.8 MPa air system, so a folded drilling derrick can be lifted off, set down and aligned without…
A 25 tonne winch line pull at the bottom layer, on 1-1/8 inch (28 mm) wire, is what this gin-pole truck hoists with, while the folding mast frame is rated to lift 15 tonnes and the flat deck carries a 20 tonne load.
