Built for wells the shallow and mid rigs cannot reach, this 550 hp truck-mounted workover rig carries its rated 550 hp power pack on a multi-axle heavy off-road carrier and is rated for typical workover to 5800 m and service to 7000 m. A reinforced lattice mast is raised and leveled by full hydraulic drive, on multipoint telescopic outriggers, while the driller works from an enclosed, centralized control cabin. The whole rig relocates as one self-propelled vehicle rather than as a split skid spread. It is aimed at deep-well workover, overhaul and geothermal service in cluster fields where moving a large rig is expensive, and it is rated for continuous duty across the -20 C to +55 C field temperature band.
Product-specific advantages depend on the selected model and configuration. Contact our technical team for a matched review.
| Product | 550HP Truck Mounted Rigs |
|---|---|
| Product line | Drilling Rigs |
| Item | Specification |
|---|---|
| Rated Power | 550 HP |
| Carrier Chassis | multi-axle heavy-duty off-road truck chassis |
| Rated / Max Hook Load | Customizable for deep well heavy-load service |
| Mast Structure | Reinforced lattice mast |
| Mast Lifting Mode | Full automatic hydraulic drive |
| Control Mode | Enclosed driller cabin centralized control |
| Transfer Mode | self-propelled integral relocation |
| Outrigger Type | Multipoint hydraulic telescopic outriggers |
| Typical Workover Depth | Up to 5800 m |
| Typical Service Depth | Up to 7000 m |
| Operating Temperature | 20℃ ~ +55℃ |
| Main Application | deep well workover, overhaul, geothermal & oil and gas land field service |
For a useful technical response, include the target well conditions, operating depth or pressure, expected quantity, destination and any required configuration.
Send an InquiryAvailable configurations can be matched to the equipment model, operating conditions and project requirements.
The 550HP truck-mounted rig questions focus on the 7,000 m envelope, 1,350 kN hook and C18 drivetrain.
Typical workover reaches 5800 m and service reaches 7000 m from the multi-axle heavy off-road carrier, covering the range the shallow and mid rigs cannot reach. Hook and mast ratings are confirmed against the planned deep-well strings before quotation.
The whole rig relocates as one self-propelled vehicle: the reinforced lattice mast is raised and lowered by full hydraulic drive, outriggers retract, and the carrier is part of the unit rather than a split skid spread. That removes the expensive transport job a large rig usually creates.
A reinforced lattice mast is raised and leveled hydraulically on multipoint telescopic outriggers, and the driller runs the spread from an enclosed, centralized control cabin. The layout sets up fast on uneven ground and keeps the crew inside the cabin during long-cycle work.
The standard build is rated for continuous duty across −20°C to +55°C, with cold-start and heat-dissipation options available for extreme sites; desert, Gobi, hilly and high-altitude terrain is covered by climate and coating provisions configured at order time.
Each unit ships with operation and maintenance manuals, the factory test report and a first-period spare list, plus remote technical guidance. On-site commissioning and operator training can be arranged for overseas projects.
Commercial terms are confirmed in the quotation for the exact configuration, quantity and destination.
Manufactured complying with API petroleum machinery standards under ISO 9001:2015, this rig is widely deployed for largescale onland oil and gas fields, deep geothermal projects and heavy-load well service under harsh desert and Gobi field environmentsMade-in-Ch....
Operation manuals, chassis documentation and factory test reports are supplied; the PTO and hydraulic system schematics are included for the client's service department. On-site commissioning is available.
Confirmed in the quotation according to configuration, quantity and destination.
Manuals, conventional spare parts and remote technical guidance are included; on-site commissioning and operator training can be arranged on request.
Payment schedule, Incoterms, port and packaging are agreed in the sales contract.
A recommended spare-parts list for the first operating period is provided with the quotation.
Explore nearby products to compare equipment scope before sending an inquiry.
Workover to 3200 m on 2 7/8-inch upset tubing is this rig's job: a 400 kN nominal hook load that peaks at 675 kN, run through six lines of 22 mm wire under a mast that stands 21 m or 23.5 m.
Badged ZYT5502TZJ, this rig is defined by a 1125 kN maximum load on a 4x5 traveling system, eight lines of 26 mm (1-inch) wire pulled to a 210 kN fast-line pull, under a 32 m clearance mast.
At 5500 m of workover with 73 mm tubing, and 4500 m when drilling with 73 mm drill pipe, the XJ450 sits where shallow service rigs run out of reach and the deep fleet starts.
Rated to 1470 kN maximum hook load, the 650 hp truck rig is the machine a service fleet steps up to when 1125 kN-class units start giving away margin on heavy overhaul.
