Workover to 3200 m on 2 7/8-inch upset tubing is this rig's job: a 400 kN nominal hook load that peaks at 675 kN, run through six lines of 22 mm wire under a mast that stands 21 m or 23.5 m. The hook tops out at 1.5 m/s, and the whole package drives as one 31,490 kg vehicle measuring 13,910 mm long with the mast folded. It is the lightest truck-mounted workover rig in the line, sized for shallow oil and gas service, water and geothermal wells, and scattered pads where the equipment has to move often. Because it travels and rigs up fast rather than carrying deep-well capacity, it earns its place on short, frequent workover calls instead of long drilling campaigns.
Product-specific advantages depend on the selected model and configuration. Contact our technical team for a matched review.
| Product | 250HP Truck Mounted Rigs |
|---|---|
| Product line | Drilling Rigs |
| Workover depth (2 7/8″upset tubing) m | 3200 |
|---|---|
| Nominal hook load KN | 400 |
| Max. hook load KN | 675 |
| Mast height m | 21,23.5 |
| Diameter. of rope mm/Effective number of rope n | φ22/6 |
| Max. hoisting speed of hook m/s | 1.5 |
| Outside dimension when moving (including mast) mm | 13910×2705×4320 |
| Curb weight kg | 31490 |
For a useful technical response, include the target well conditions, operating depth or pressure, expected quantity, destination and any required configuration.
Send an InquiryAvailable configurations can be matched to the equipment model, operating conditions and project requirements.
The 250HP truck-mounted rig questions cover its 3,200 m workover depth, 1.5 m/s hoist and single-load relocation.
On 2 7/8-inch upset tubing the rig works to 3200 m, with a 400 kN nominal hook load that peaks at 675 kN through six lines of 22 mm wire. The 21 m or 23.5 m mast option is matched to the shallow and mid-range service programme, so the package suits frequent calls on mature shallow blocks rather than deep drilling campaigns.
Yes. The complete unit drives as one 31,490 kg vehicle, 13,910 mm long with the mast folded, and rigs up without trailers or a separate crane spread. For operators running several shallow wells in one field, the 250 hp truck-mounted workover rig acts as a scheduling tool as much as a hoist.
No. The carrier is part of the rig: with the mast lowered, the unit is road-mobile as one load and moves between wells under its own power. Extra transport is only considered for unusual moves or cross-region transfers.
The standard build suits mild desert, flat and low-altitude sites. The 6×4 carrier is standard and 6×6 drive can be added for looser ground, with low-temperature start and coating configured to the operating region at order time.
Each 250HP Truck Mounted Rig ships with operation and maintenance manuals, the factory test report and a first-period spare list, with remote technical guidance included. On-site commissioning and operator familiarization can be arranged for first-time crews.
Commercial terms are confirmed in the quotation for the exact configuration, quantity and destination.
Built to API 4F at the Jingzhou plant under ISO 9001:2015 quality management, the truck-mounted derrick is load-tested to its rated hook load before shipment; the chassis-mounted power pack, drawworks and hoisting system are run through a full factory test cycle, and test reports are supplied with the unit.
Operation manuals, chassis documentation and factory test reports are supplied; the PTO and hydraulic system schematics are included for the client's service department. On-site commissioning is available.
Confirmed in the quotation according to configuration, quantity and destination.
Manuals, conventional spare parts and remote technical guidance are included; on-site commissioning and operator training can be arranged on request.
Payment schedule, Incoterms, port and packaging are agreed in the sales contract.
A recommended spare-parts list for the first operating period is provided with the quotation.
Explore nearby products to compare equipment scope before sending an inquiry.
Badged ZYT5502TZJ, this rig is defined by a 1125 kN maximum load on a 4x5 traveling system, eight lines of 26 mm (1-inch) wire pulled to a 210 kN fast-line pull, under a 32 m clearance mast.
At 5500 m of workover with 73 mm tubing, and 4500 m when drilling with 73 mm drill pipe, the XJ450 sits where shallow service rigs run out of reach and the deep fleet starts.
Built for wells the shallow and mid rigs cannot reach, this 550 hp unit carries its rated 550 hp power pack on a multi-axle heavy off-road carrier and is rated for typical workover to 5800 m and service to 7000 m.
