8 t at 2.0 m boom lift, 360 degree slew
The telescopic boom lifts 8,000 kg at a 2.0 m radius, or 5,000 kg at 2.25 m, and slews a full 360 degrees for multi-directional picks that a vertical, limited-swing gin-pole cannot match.
Oilfield Transport Equipment
Truck with Crane
This unit lifts 8,000 kg at a 2.0 m radius, or 5,000 kg at 2.25 m, from a multi-section telescopic boom that reaches 15,000 mm fully extended, 10,500 mm on the shorter configuration, and then hauls a 9,140 kg payload on the flat carriage. Unlike a vertical gin-pole, the boom slews a full 360 degrees, so loads can be picked, swung and set across the radius the pad needs rather than raised straight up. The 6,800 by 2,428 by 592 mm carriage, or 7,500 by 2,294 by 550 mm on the long body, carries the tubing, casing, wellhead and skid hardware the crane has just lifted. Sized at 10,415 by 2,500 by 3,850 mm, it is the lift-and-haul answer for completion and workover sites where a separate crane and a separate truck would otherwise be mobilized.
Core advantages
Designed around the operating requirement.
15 m full-arm extension height
Fully extended the boom reaches 15,000 mm, or 10,500 mm on the shorter configuration, giving the height margin to set wellhead, BOP and skid components over obstructions on the pad.
9,140 kg carriage payload, flat-bed haul
The flat carriage carries a 9,140 kg rated payload, or 8,645 kg on the alternate body, so the same vehicle that made the lift also hauls the load to the laydown area.
Moment limiter and outrigger interlocks
A moment limiter, height-limit switch, anti-overwind protection and H-type outrigger interlocks lock the boom down until the legs are set and level, preventing tip-over on uneven pad ground.
Boom retracts compactly for transit
The multi-section boom retracts to a compact envelope for road travel, so the truck drives between well sites without disassembly or a separate low-loader.
Off-road chassis reaches remote wells
The heavy-duty off-road chassis and all-terrain tires carry the 10,415 mm long vehicle over gravel, mud and ungraded access roads to marginal and cluster-well locations.
| Product | Truck with Crane |
|---|---|
| Product line | Oilfield Transport Equipment |
| Overall size (L×W×H) mm | 10415×2500×3850(10760×2470×3650) |
|---|---|
| Max lifting capacity kg/m | 8000/2.0(5000/2.25) |
| Max. lifting height of full arm mm | 15000(10500) |
| Internal size of carriage edge (L×W×H) mm | 6800×2428×592(7500×2294×550) |
| Rated payload kg | 9140(8645) |
Application
Where this equipment is used.
- Lifting, slewing and setting loads across the pad radius: 8000 kg at 2.0 m or 5000 kg at 2.25 m from the telescopic boom.
- Reach duties to 15,000 mm fully extended or 10,500 mm on the shorter configuration.
- Transporting the lifted hardware: 9140 kg payload on the flat carriage.
- Handling tubing, casing, wellhead and skid hardware between locations without a separate crane.
- Rapid moves between well slots on the truck-mounted unit.
- For desert, Gobi or high-altitude locations, the Truck with Crane climate package and coating are matched to the site at order time.
Next step
Send the operating requirement.
For a useful technical response, include the target well conditions, operating depth or pressure, expected quantity, destination and any required configuration.
Send an InquiryConfiguration
Options for a matched equipment scope.
Available configurations can be matched to the equipment model, operating conditions and project requirements.
- Boom: reach configuration (15,000 mm or 10,500 mm) selected against the pad layout.
- Lift rating: 8000 kg at 2.0 m or 5000 kg at 2.25 m confirmed against the heaviest load.
- Carriage: 9140 kg payload and bed size confirmed against the transport load.
- Controls: hydraulic crane control and safety interlocks matched to the operation.
- Road provisions: axle loads and permits confirmed for the planned routes.
- Support package for Truck with Crane: manuals, factory test report and first-period spares; commissioning and crew training confirmed at order time.
Buyer questions
Frequently asked about this equipment.
The truck with crane questions that matter most are lifting capacity, boom reach and off-road operation.
What are the main applications of Truck with Crane in oil-field?
The unit is a lifting-and-carrying truck for well-site logistics: the hydraulic crane handles 8000 kg at a 2.0 m radius, or 5000 kg at 2.25 m, from a telescopic boom that extends to 15,000 mm, and the flat carriage carries a 9140 kg payload. The boom slews a full 360 degrees, so loads are picked, swung and set across the pad radius instead of raised straight up, which suits tubular goods, wellhead hardware and skid-mounted equipment at dispersed well locations.
What is the difference between Truck with Crane and Gin Pole Truck?
The crane truck uses a multi-section telescopic hydraulic boom with full 360-degree slewing, so it reaches across the working radius and sets loads at angles a fixed gin-pole cannot. The gin-pole truck is limited to near-vertical lifting for pipe-string erection; the crane truck covers multi-directional lifts such as loading tubulars onto the bed or setting equipment beside the well.
How does the unit guarantee safety during heavy-load lifting?
The crane carries a moment limiter, height limit switch, anti-overwinding alarm, hydraulic counterbalance valve and H-type outrigger interlock. The hoist stays locked until all outriggers are extended and leveled, which is the protection that prevents chassis overturn and load drop on uneven well-pad ground.
Can Truck with Crane operate normally on complicated off-road well-site roads?
Yes. The truck rides a heavy off-road chassis with reinforced suspension and all-terrain tires, and the boom retracts for transit without disassembly. It is rated for gravel, ruts and seasonal mud at −40 to +55℃ ambient. State the site climate at order time so the cold-start and heat package is matched.
Can lifting capacity, boom specifications and accessories be customized?
Yes. The configuration is settled against the lifting programme before the order: crane rated tonnage, boom working radius, flat-bed dimension, explosion-proof grade, wired remote-control function and hoisting attachments are matched to the expected well-site loads, terrain and local lifting-safety regulations, then written into the quotation and the factory test report.
Procurement information
Ordering this equipment.
Commercial terms are confirmed in the quotation for the exact configuration, quantity and destination.
Certification & standards
Manufactured complying with API petroleum-industry lifting equipment specifications and heavy-duty commercial vehicle safety standards, the unit is well-suited for severe operating environments such as deserts, Gobi terrains, muddy mountain access roads and high-temperature wellsite environments. The crane lifting system is load-tested to its rated capacity at the Jingzhou plant under ISO 9001:2015 quality management, and test reports are supplied with the unit.
Documentation
Operation and maintenance manuals, chassis documentation and factory test reports are supplied; the hydraulic and electrical schematics are included for the client's service department.
Lead time
Confirmed in the quotation according to configuration, quantity and destination.
Warranty & after-sales
Manuals, conventional spare parts and remote technical guidance are included; on-site commissioning and operator training can be arranged on request.
Payment & delivery
Payment schedule, Incoterms, port and packaging are agreed in the sales contract.
Spare parts
A recommended spare-parts list for the first operating period is provided with the quotation.
Related equipment
Continue browsing this product line.
Explore nearby products to compare equipment scope before sending an inquiry.
Bulk Cement Truck
A sealed 14.1 to 20 cubic metre powder tank on a heavy off-road chassis is the working heart of this unit, with a 7.5 to 10 cubic metre per minute compressor holding the chamber at a 0.2 MPa working pressure throughout…
Derrick carrying Truck
This carrier is built around a 13 MPa lifting-and-landing hydraulic loop, backed by a 6 MPa fine-adjustment circuit and a 0.8 MPa air system, so a folded drilling derrick can be lifted off, set down and aligned without…
Dump Truck with Hydraulic Arm
A 11,170 kg rated load on a 6 by 6 off-road chassis defines this unit, with a 27 MPa and 40 L per minute hydraulic circuit, fed by an imported Italian axial plunger pump, driving both the articulated loading arm and the…